 |
 |
|
|
|
 COMMANDER Teachme hoist remote control equipment is specially designed for the safe and cost effective operation of 1 or 2 motion electric hoists and other electrically powered or controlled equipment requiring single or 2 speed remote control. Easy to install receiver decoders are sized to suit the application so as to minimise redundancy and optimise cost effectiveness. This system uses the well proven 7 or 8 relay universal receiver decoder configured to operate from low voltage AC control circuits. COMMANDER Watchme main line contactor voltage monitoring is incorporated as standard. For hoists or equipment without a main line contactor, a special by-pass circuit can be enabled. Motor current monitoring is available.
 Series 10 transmitters are available for 1 or 2 motion control in a 6 button format, a start button is incorporated. A Rotary switch can be incorporated for hoist select. This transmitter is supplied with a microprocessor controlled 433MHz FM radio transmit module or infra-red and radio S10 style emitters. Infra-Red transmitters are supplied with an internal rechargeable NiCad (or NiMH) battery system. |
|
 The S10 Integrated Receiver Decoder can be used with both S5 and S10 transmitters and where only 2 motions 2 speed or 3 motion 1 speed applications are required. This unit will recognise and autoconfigure itself for either version transmitter or radio or Infra-Red transmission medium. The radio version receivers are integral with 'box top' antenna, Infra-Red versions use the same connector for the sensor(s). |
|
|
|
|
